Weber Rescue Systems E-FORCE3 - Maintenance; Charging Cycles

6.7 Maintenance
If the mains connecon line is damaged, it must be replaced by a customer service locaon.
Only use approved accessories and approved spare parts. If a replacement descripon is not
provided for a component, have it replaced by an authorised customer service locaon.

 
Charging cycles Around 1000
Paral discharge No eect as the baery always holds the capacity unl it
is discharged.
Paral discharge and
subsequent recharge
Each recharging process is considered a complete
charging cycle, which is why the baery should be used
unl it is fully discharged.
Protecon against total
discharge
Present