Weber Rescue Systems E-FORCE3 - Page 26

321 4 5 6 87
9
Spreader
1 Spreader ps
2 Spreader arms
3 Handles
4 Ram body
5 Pump/oil reservoir
6 Rocker switch
7 On/O buon
8 Control handle
9 Baery

Baery-powered spreaders are specially designed rescue appliances for spreading, pressing and
pulling. They are used to rescue trapped or enclosed accident vicms. The spreaders are mainly
suitable for opening doors, and for liing vehicles and other movable loads.
Because the appliances are equipped with an internal electrohydraulic drive, they are not linked
to a power unit and can therefore be used in hard-to-reach locaons.
The movement speed of the spreading arms is aected by moving the rocker switch on the
control handle with greater or lesser force. The maximum spreading force is achieved only
when the rocker switch is on full acvaon.
CAUTION!

The complete hydraulic system is designed as a closed circuit and must therefore be
completely free of air. For this reason, do not aempt to carry out repairs on the drive, to
ensure that no air can enter the system!