WEBTEC HPM - Deleting MIN;MAX Values (RESET); Differential Value Display

86 V2.0/02.11
Connectingthesensors/displayfunctions
5.4 DeletingMIN/MAXvalues(RESET)
The MAX values measured until now are
displayed in the MAX display.
Deleting MIN/MAX values.
The updated MAX values are displayed in the
MAX display.
Example: Loss of pressure in the hydraulic
system
5.5 Differentialvaluedisplay
► The settings IN1 – IN2 are described in the chapter 'Display congu-
ration (LINE)'.