WEBTEC HPM - Recording measured values; Settings for recording measured values (REC)

106 V2.0/02.11
Recordingmeasuredvalues
9. Recordingmeasuredvalues
9.1 Settingsforrecordingmeasuredvalues(REC)
The following parameters are displayed in the information bar:
Number of recorded measured values.
In this example there are 108 measurements saved to
memory.
Memory allocation
Number of measured values that can still be recorded.
With the current setting/conguration it is possible to
save a further 17 measurements.
The REC symbol ashes when measured values are
being written to memory.