WEBTEC HPM - Displaying Defined Measurement Tasks (SET-PROJECT)

97V2.0/02.11
Devicesettings(SET)
ENGLISH
6.4 Displayingdenedmeasurementtasks(SET-PROJECT)
Up to ve different measurement tasks (PROJECT) can be congured
in the PC software. Certain sensors are dened for each input. These
denitions can be retrieved in SET-PROJECT.
Input 1
Wrong sensor connected!
Please use measurement range 100
bar.
Input 4
Correct sensor connected
FS = 600 L/min
It is only possible to alter this setting using the PC software.