WEBTEC HPM - Setting the units (SET-UNIT)

96 V2.0/02.11
Devicesettings(SET)
6.1 Settingtheunits(SET-UNIT)
MEM
Available for selection:
PRESSURE: bar, mbar, psi, MPa, kPa
TEMPERATURE: °C, °F
FLOW: L/min, G/min (US)
POWER: kW, HP (US)
6.2 Autopoweroff(SET-AUTOPOWER)
Available for selection:
AUTOPOWER: OFF, ON
6.3 Settingauxiliarysensors(SET-AUX.SENSOR)
► Further information is available in the chapter 'Connecting auxiliary
sensors'.