76 V2.0/02.11
Deviceversion/rangeofsupply
2. Deviceversion/rangeofsupply
The measuring instrument and sensors enable the user to measure all
relevant parameters in a hydraulic system.
Parameters:
• [bar/psi] Pressure, Dp (load sensing pumps)
• [°C/°F] Temperature
• [L/min/G/min] (U.S) volumetric ow rate
• [1/min] RPM
Automatic sensor recognition means the measuring instrument is simple
to operate. It is not necessary to carry out any further settings to the
device.
Plug & Work is one of the more important attributes of the device. It al-
lows the measuring instrument to be ready to operate in an instance,
and excludes erroneous measurements.
To Next Page
Loading...