115V2.0/02.11
Recordingmeasuredvalues
ENGLISH
MemoryfunctionMANUAL
The manual trigger function documents the process of recording meas-
ured values triggered by a manual start signal initiated by the user.
Automatic recording of measured values ends after a predetermined
measurement time.
For this reason, time-dependent recordings of measured values are
started manually.
The following parameters must be set:
Menu Setting/
pre-selection
Example Notes
TIME UNIT> sec, hrs h Pre-selected time unit
(trigger/pre-trigger)
DURATION> Number 100 Recording time
PRE
TRIGGER>
Number 1 Pre-trigger time (time
before the trigger signal)
TRIGGER> IN p1 Starting-point measuring
channel
To Next Page
Loading...