WEBTEC HPM - Page 5

72 V2.0/02.11
Contents
6. Devicesettings(SET) 94
6.1 Setting the units (SET-UNIT) 96
6.2 Auto power off (SET-AUTO POWER) 96
6.3 Setting auxiliary sensors (SET-AUX. SENSOR) 96
6.4 Displaying dened measurement tasks
(SET-PROJECT) 97
6.5 Setting the contrast (SET-CONTRAST) 98
6.6 Setting the time/date (SET-TIME/DATE) 98
6.7 Displaying the device version (SET-VERSION) 98
6.8 Factory setting (USER RESET) 99
7. Conguringthemeasuredvaluememory
(MEMORYSET) 100
7.1 Deleting measured value memory
(MEM-DELETE MEMORY) 102
7.2 Setting the data format (MEM-DATA FORMAT) 102
7.3 Setting the recording format (MEM-REC-CONFIG) 103
8. TheRECmenu 104
9. Recordingmeasuredvalues 106
9.1 Settings for recording measured values (REC) 106
9.2 The REC NAMES setting 107
10. SettingandoperatingviaPC 120
10.1 Connecting to a PC 120
10.2 Operating/conguring via PC 121
11. Accessories 122
12. Technicaldata 125
13. Descriptionofthememoryfunctions 127