Please note: After language is switched, it can be effective only after restart.
5.1.3. Machine Setting
Dual-extruder machine use single nozzle printing
Click “Machine” on the menu bar→ “Machine Setting”, enter to machine setting
interface, as shown in figure below.
Blue Box refers to the size of machine printing platform, we have already
performed the preset according to your choice of model, please do not change these
data.
Red Box refers to the associated settings of machine, including adding new
machine model you need, delete the machine model you don't need, also can modify
the name of machine model, modification of machine model name would not
change any parameters.
To Next Page
Loading...
