Operation
2. Use arrow keys to select line, and press Insert button to open edit box.
3. Enter your NC code in edit box.
4. Press Auto button on operational panel to activate Auto mode.
5. Press F1~F7 or Enter to execute corresponding code.
Execution of user-defined NC code must be in Auto mode.
Check Statistics Information
Users can check machining statistics information of both current program and history programs,
including completed workpiece number, completed length, running time, etc.
To check the machining statistics information:
1. Press State > =.
It turns to Part Statistic interface.
2. (Optional) Press F1 to clear all statistics in the program list.
3. (Optional) Press F2 to export all statistics in the program list to external storage device (e.g. a
USB flash disk). The statistics will be saved as a .txt document.
Check Logs
History operations, warnings, errors can be logged.
To open Log interface:
1. Press System > B to turn to Log interface.
• Show All: Show all logs.
• Show Today: Show today's logs only.
44
To Next Page
Loading...
