WEIHONG NK280B - Parameters for Actions after Program End

NK280B Parameter Reference
Parameter Name Description
Max Cali Tolerance During several times of tool calibration, the
maximum tolerance of calibration results.
Tool Sensor Thickness The distance from Tool Sensor surface to WCS
Z0. It can be used to automatically calculate
WCS Z0 when cutter touches the Tool Sensor.
Tool Sensor Fixed Position (MCS) It includes the X, Y and Z-axis machine
coordinate of the fixed tool sensor.
Parameters for Actions after Program End
Parameters that will influence the system actions after machining stops, including prompt
method and spindle actions.
Table 13: Parameters Related with Actions after Program End
Parameter Name Description
Notification Options when Cycle Completed Inform types when cycle ends. 0: No light on;
1: Red light on for 3 sec; 2: Red light on until
any input from mouse or keyboard.
Spindle Action Options when Cycle Completed Spindle actions when cycle ends. 0: Stay; 1:
Move to fixed point; 2: Move to WCS zero.
Spindle Off when Cycle Completed Whether the spindle stops when cycle
completed.
Spindle Off when Cycle Stop Spindle Off automatically when cycle stops,
with or without related command codes in NC
file.
53