WM 67841c 03/2015
WM 100 TD EN 37
4 Preparation
Installing the respiratory air humidifier
1. Press the unlocking button on the therapy device to remove the
side cover of the therapy device.
2. Fill the respiratory air humidifier with water (see " Filling the
respiratory air humidifier", page34).
3. Push the respiratory air humidifier into the therapy device from
the side on a flat surface until the unlocking button clicks into
place audibly.
4. Pull the protective foil off the respiratory air humidifier.
Result The respiratory air humidifier is connected to the therapy device.
To Next Page
Loading...
Need help?
General
