Instructions for Assembly
Item number 116519-0000 Subject to technical modifications
Version 4 23.04.2014 Page 12/47
Cassita II/Cassita II LED
5 Assembly
5.1 Safety notes
Beware of missing or incorrect brackets as well as incorrect assessment of installation
surface.
Check before beginning the assembly work
that the mounting brackets supplied are of the same type and of the same quantity as
ordered,
that the information provided in the order about the installation surface tallies with the actual
installation surface on site.
If any deviations are found, which pose a safety risk, do not carry out the assembly
work.
Fitting the Cassita II under the ceiling requires at least 38 mm of space.
The adjusting bracket should be installed flush with the wall bracket as standard (A).
It may be pushed into the bracket by a maximum of 100 mm (B).
DANGER