Installation and operating instruction
Gas burner WG30…/1-C ZM-LN
9 Servicing
83299902 1/2019-02 La
75-124
9.5 Set ionisation and ignition electrodes
Observe notes on servicing [ch.9.1].
Remove mixing head [ch.9.3].
Undo screw 1.
Set ignition electrode and re-tighten screw.
Undo screw 2.
Set ionisation electrode and re-tighten screw.
5 mm
5 mm
1.5 ... 2 mm
ca. 7 mm
1
2