38 Welch Allyn
Mean Arterial Pressure (MAP) Mode
You may turn on or off the Mean Arterial Pressure (MAP) mode by entering the internal configura-
tion mode:
1. Turn the Spot Vital Signs off.
2. Press both the Power and Blood Pressure Start/Stop buttons simultaneously. The device
enters its internal configuration mode.
3. Press the Mode button to cycle through the menu until you reach the MAP option screen.
4. Pressing the BP Start/Stop or the Next Patient/Clear button turns the MAP on or off. When
the desired functionality is displayed, press the Mode button once to save this change.
5. Turn the device off.
When the device is turned on, the desired MAP functionality is established.
To Next Page
Loading...
