Wellav CMP201D - CE2-HDMI-02 Output Settings

CMP201D User Guide
52
Audio Bitrate(Kbps)
128~384 (AC3)
64~384(MPEG1_Layer2/
MPEG2_AAC/
MPEG4_AAC/ AC3
Passthrough)
32~384(AAC_HE_V2)
Audio PID
32~8190
Click Advance Parameters to set Encoding Parameters & Stream Output Parameters &
MPEG-2 Output Parameters & MPEG4/MPEG4_AVC Output Parameters &Other Parameters
for CH1.1/CH2.1 separately.
CE2-HDMI-02 module supports up to two channels of audio and video input. Each channel includes
1 HDMI port and 1 RCA port. It supports dual audio encoding per channel which means one audio
track from HDMI input can be encoded into two different formats for output.
CE2-HDMI-02 >Output
This feature is specifically for single program encoding and IP output directly. Outputting in this way
will not occupy baseboard multicast bandwidth.
If you want to use IP output channels in the encoder module and the baseboard IP module at
same time, you should a avoid the multicast IP address conflict. If there are two same IP addresses
enabled meantime, all the multicast videos will be affected.
 Destination IP Address and Destination Port: Using for multicast IP addresses or unicast IP
addresses and ports.