CMP201D User Guide
CE2-SDI-00>Status
Status page for CE2-SDI-00 shows the following parameters: Signal Status, Input Video
Resolution, Output Video Resolution, Video Bitrate, Audio Bitrate, Audio2 Bitrate, Total
Bitrate, Effective Bitrate, TS anaylsis and Program Name. The following parameters will display
values once a good SDI source is connected.
CE2-SDI-00 >Basic Setting
Click Basic Parameters then click Advanced Setting to see Video Parameters & Audio
Parameters & Service Parameters where you can modify and check what specific parameters you
want to see and set. Click the Apply button on the right side to make the change take effect.
To Next Page
Loading...
