Westermann WR 840 Battery - Charging The Wr 870 Battery; Blown Fuse

33
9 Start-up
9.6 Charging the WR 870 Battery
Westermann RadialSweepers areequipped witha maintenance-free
battery.
Theenclosedchargerplugsintoastandard220Vmainssocket.Thenthe
adapter of the charger is inserted into the socket on the back of the
brush.
Nowthebatterychargesautomatically!
Thebatterychargerisequippedwithoverloadprotection,sothatover-
chargingisprevented.Thechargingtimedependsonthebatterylevel.
TheWR870Batteryisequippedwithoverchargingprotectionintheform
ofafusewhichswitchesothemachinebeforeitcanbedamaged.
Atthesametime,thefuseservesasashut-odevice,sincetheremoval
ofthefuseprotectsthesweeperfromunauthoriseduse.
Ifthefuseistriggered,thesweepermustbecheckedforanytechnical
errors.
9.6.1 Blown fuse
  Ablownfusecouldindicateamachinedefect.Inthis
  case,pleasecontactyourlocaldealerorhavethe
  machinecheckedbyaspecialistworkshop.
(Fig. 16 - Battery charging)
NOTICE
Securingslot