Westermann WR 840 Battery - Exchange Of The Brush Element; Removal And Installation Of The Brush Element

41
12 Maintenance and servicing
12.5 Replacement of the brush element
Inthecaseofsignsofwearordefectsonthebrush,youhavetheoption
ofreplacingthebrushringwithanewone.Todothispleasefollowthe
followingsteps.
12.5.1 Removal and installation of the brush element
OntheWR870Honda,emptythefueltankbeforetippingoverthebrush.
Thentiltthesweeperforrearaccess(handlesonthegroundforastable
gripandsafeaccess).
Crushing hazard due to dropping of the Radial Sweeper!
ThetiltingoftheRadialSweepercanhappenuncontrol-
  ledbyexternalinuencesandcausehazards.
  Therefore:
eCarefullyfollowthestepslistedbelowwhentilting
  theRadialSweeper.
  e SecurethepositionoftheRadialSweeperbyputting
  additionalweightonthehandle.
Thebrushesconsistofabrushring,whichisheldinplacebyametalclip.
Bylooseningthemetalclips,itispossibletoremovethebrushring.
  Assemblytakesplaceinreverseorder.
DANGER
!
NOTICE
(Fig. 22 - Replacement of the brush element)