Need help?Do you have a question about the Western Digital Ultrastar Data102 and is the answer not in the manual?
Provides a detailed description of the Ultrastar Data102, including its form factor and capabilities.
Summarizes the environmental, electrical, and mechanical specifications of the Ultrastar Data102.
Specifies the necessary rack dimensions and mounting requirements for the Ultrastar Data102.
Provides a comprehensive list of compatible HDD and SSD drives for the enclosure.
Details the enclosure services functionality and firmware features, including SES compatibility.
Explains the out-of-band management capabilities using Redfish API and RESTful interface.
Provides step-by-step instructions for replacing an IOM.
Details the procedure for replacing a Power Supply Unit (PSU).
Provides instructions for replacing a rear fan module.
Details the procedure for replacing an IOM fan.
Provides instructions for replacing a drive assembly.
Provides instructions for replacing the main chassis.
Provides instructions on how to upgrade the enclosure firmware.
Details how to configure the Out-of-Band Management (OOBM) network settings.
Provides precautions for handling components to prevent electrostatic discharge (ESD).
Details important considerations for power connections and circuit loading.
Outlines general safety procedures for maintenance and servicing.
Lists important safety symbols and warnings for product usage.
Provides a detailed description of the Ultrastar Data102, including its form factor and capabilities.
Summarizes the environmental, electrical, and mechanical specifications of the Ultrastar Data102.
Specifies the necessary rack dimensions and mounting requirements for the Ultrastar Data102.
Provides a comprehensive list of compatible HDD and SSD drives for the enclosure.
Details the enclosure services functionality and firmware features, including SES compatibility.
Explains the out-of-band management capabilities using Redfish API and RESTful interface.
Provides step-by-step instructions for replacing an IOM.
Details the procedure for replacing a Power Supply Unit (PSU).
Provides instructions for replacing a rear fan module.
Details the procedure for replacing an IOM fan.
Provides instructions for replacing a drive assembly.
Provides instructions for replacing the main chassis.
Provides instructions on how to upgrade the enclosure firmware.
Details how to configure the Out-of-Band Management (OOBM) network settings.
Provides precautions for handling components to prevent electrostatic discharge (ESD).
Details important considerations for power connections and circuit loading.
Outlines general safety procedures for maintenance and servicing.
Lists important safety symbols and warnings for product usage.
General| Data transfer rate | 12 Gbit/s |
|---|---|
| Storage drive size | 3.5 \ |
| Storage drive capacity | 8000 GB |
| Storage drive interface | Serial Attached SCSI (SAS) III |
| Storage drives installed | Yes |
| Installed storage drive type | HDD |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 816 TB |
| Maximum supported storage capacity | - TB |
| Number of storage drives installed | 102 |
| Supported storage drive interfaces | SAS-3, Serial ATA III |
| Operating altitude | 0 - 915 m |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 5 - 85 % |
| Chassis type | Rack (4U) |
| Product color | Black, Grey |
| Number of fans | 6 fan(s) |
| Built-in display | No |
| Serial interface type | RJ-45 |
| Number of mini-SAS host ports | 12 |
| AC input voltage | 200 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Number of power supply units | 2 |
| Power supply unit (PSU) capacity | 1600 W |
| Device class | Small & Medium Business |
| Harmonized System (HS) code | 84717020 |
Weight and Dimensions| Depth | 1047 mm |
|---|---|
| Width | 447 mm |
| Height | 175 mm |
| Disk enclosure weight | 31800 g |
To Next Page
