Western Scale MAX - MAX Operation (Weighing Mode); MAX Weighing Mode: Start-Up Procedure; MAX Weighing Mode: Basic Weighing Process

10
Di
g
ital Indicato
r
OPERATION (WEIGHING MODE)
Start-Up
1. Ensure AC, external 12 volt, or battery power is being applied.
2. Press and hold the ON/OFF key.
3. The indicator will perform a short start-up sequence including the software
version number and a display segment test before entering Weighing
Mode (displaying the scale weight).
Basic Weighing
1. Ensure the weighing platform (scale) is empty and the indicator reads ‘0’.
2. If the indicator does not read ‘0’, press the ZERO key.
3. Load product on the scale and read the weight data on the indicator.