Western Scale MAX - MAX Settings: Time and Date Configuration

15
O
p
eration Manua
l
TIME & DATE
1. From Weighing Mode, press and hold the TARE key until “CLOC” is
displayed, followed by the time.
• If 12 Hour Clock is selected, the time will appear HH.MM.A/P
• If 24 Hour Clock is selected, the time will appear HH.MM
2. Adjust the time using the LEFT & RIGHT ARROW keys to select digits
and the UP & DOWN ARROW keys to alter digits.
3. Press ENTER to confirm and the date will be displayed
• If International Date is selected, the date will appear DD.MM.YY
• If US Date is selected, the date will appear MM.DD.YY
4. Adjust the date using the LEFT & RIGHT ARROW keys to select digits
and the UP & DOWN ARROW keys to alter digits.
5. Press ENTER to confirm and return to Weighing Mode.
Time & Date must be enabled and the format (12 Hr, 24 Hr, etc.)
selected in Calibration Mode by qualified Technicians.
If the MAX is disconnected from AC power or another power
source, batteries must be installed for the clock to keep time.