2
Di
ital Indicato
INTRODUCTION
The MAX digital weight indicator has been specifically designed for mobile
weighing applications. Multiple power inputs, a versatile display, and a weather-
proof enclosure allow for efficient and trouble-free scale operation in any location.
Sophisticated filtering algorithms and display modes offer the best solution
available for vibration issues and dynamic applications such as livestock
weighing.
Built from the ground up with battery-friendly components, the MAX incorporates
Western’s unique PowerMAX operating platform that intelligently identifies when
to supply or conserve power resources. This industry leading power efficiency
stretches battery life to over 500 hours! Designed with the durability,
functionality, and versatility expected from Western, the MAX is truly engineered
for the diversity of the weighing industry.
The following information is for the exclusive use of WESTERN Dealers and
Customers.
Safety
Installation, configuration, and servicing are only to be done by qualified Scale
Service Technicians as authorized by Western.
Power must be disconnected before servicing the unit. Disconnection from the
line voltage is done by disconnecting the mains plug.
This equipment must be connected to a socket-outlet with a protective earthing
connection. The socket outlet shall be installed near the equipment, and shall be
easily accessible.
This equipment is intended for connection to multiple RATED VOLTAGES or
FREQUENCIES. The switchover to the corresponding voltage is done
automatically by the equipment.
Scale Service Technicians handling MAX PCBs must observe
proper electrostatic discharge (ESD) handling procedures.
ATTENTION! Unauthorized installation and service of this unit
may void the warranty.
CAUTION! HIGH VOLTAGES are present inside the MAX
indicator enclosure.
To Next Page
Loading...
