Need help?Do you have a question about the Western Scale M2000 and is the answer not in the manual?
Overview of the M2000 digital weight indicator family and its applications.
Details on the performance, accuracy, versatility, and durability of the M2000 system.
Description of different M2000 models and their enclosure types.
Steps for receiving inspection and checking the M2000 indicator kit contents.
Explanation of the Alpha-Numeric Display and LED Indicator Lamps on the M2000.
Describes the functions of the ON/OFF, ZERO SCALE, and CLEAR keys on the M2000 keypad.
Explains the operation of the TARE and PRINT/SELECT keys for scale functions.
How to access and use M2000 functions, including selecting scale channels.
How to sum multiple scale channels for a total weight display in the M2000.
Functions for scanning channels, changing between Gross/Net modes, and selecting units.
Information on electronic sealing, passwords, audit trail, and preventing unauthorized changes.
Procedures for testing and replacing the M2000's internal backup battery.
Specifies the necessary power quality and connections for M2000 indicators.
Essential guidelines for proper grounding to prevent static and noise issues.
Instructions for safely opening M2000 enclosures to access internal terminals.
Diagram and pin-out for M2000A PCB terminals, including COM, SMARTWIRE, and loadcells.
Wiring procedures for connecting analog loadcells to the M2000A.
Steps for correctly connecting the 12VDC power supply to the M2000.
Steps for powering on the M2000 and common display issues and solutions.
Overview of entering and operating within the M2000's Calibration Mode.
Explains the keypad functions specific to the Calibration Mode.
Parameters for basic scale configuration like decimal points, graduations, and capacity.
Parameters related to scale calibration, including units and deadload.
Procedure for calibrating the scale's span using a known test weight.
How to set the M2000's internal time and date, including format options.
Configuration of serial ports, wiring, and default settings for M2000 communication.
Settings for data bits, baud rate, and parity for serial communication.
Options for configuring the M2000's output string formats for various devices.
Settings for serial handshaking (RTS/CTS) and string output modes.
How to configure M2000 COM ports for RS422 communication.
Routing serial output strings and setting transmission delays for COM ports.
Guide to connecting the M2000 to a PC using Hyper Terminal for data transfer.
Procedures for connecting M2000 auxiliary peripherals using the SMARTWIRE interface.
Enabling and managing the SMARTWIRE port, including error handling.
Information on the 4-20mA current loop board and its connection.
Setting the zero offset and span for the 4-20mA current loop output.
Connecting and configuring the Setpoint option board for output control.
Controlling the function of setpoints using the Setpoint Control Mask.
Procedures for entering specific weight values for each setpoint.
Connecting and using the Remote Input board for external switch control.
Supported remote functions like ZERO, TARE, CLEAR, GROSS, and PRINT.
A comprehensive list of M2000 parameters, their functions, groups, and page references.
A list of M2000 error codes, their descriptions, and associated parameters.
Details on various string formats supported by the M2000 for data output.
Technical specifications covering performance, loadcells, communications, electrical, and approvals.
Information regarding the warranty terms and conditions for the M2000.
General| Brand | Western Scale |
|---|---|
| Model | M2000 |
| Category | Accessories |
| Language | English |
To Next Page
