HIGH SPEED DIGITAL WEIGHT INDICATORS
14
FAiL
SECURITY FEATURES
ELECTRONIC SEAL
M2000 Set-Up and Calibration settings are electronically sealed with a password.
This safeguard helps prevent accidental or unauthorized alteration of important
scale settings.
THE PASSWORD
Passwords are 4 digit numbers (0000 to 9999). The factory default for the
password is 1111, and can be changed in Calibration Mode.
If an incorrect Password is entered, the M2000 display will read:
VIEW OR CHANGE THE PASSWORD - PARAMETER 96
The Password must be changed in the M2000’s Calibration Mode.
(See Enter Calibration Mode - Page 28)
To view the current Password:
• Enter Parameter 96. The current Password is displayed.
• Press the [CLEAR] key to exit without changing.
To change the Password:
• Enter Parameter 96. The current Password is displayed.
• Enter a new 4 digit Password followed by the [PRINT/SELECT] key.
IMPORTANT: IF THE PASSWORD IS FORGOTTEN,
CALIBRATION MODE WILL BE INACCESSIBLE. CONTACT THE
WESTERN SCALE CO. LTD. FACTORY FOR ASSISTANCE.
To Next Page
Loading...
