9
TECHNICAL MANUAL
TARE KEY
There are 2 methods used to tare the scale:
Method 1: Tare a random weight on the scale.
• Place an item of unknown weight on the scale. (Container, Box, etc.)
• Press the [TARE] key and the displayed weight will be tared. Note that
the NET LED will illuminate to indicate that the scale is now in NET mode.
Method 2: Manually enter a tare.
• With a stable weight on the scale, enter the desired tare weight using the
numeric keypad, followed by the [TARE] key. The NET LED will
illuminate to indicate the scale is in NET mode.
• If the scale was at zero, the tare will be displayed as a negative weight.
The scale cannot be tared if:
• There is a negative weight on the scale.
• The scale is in motion.
• The [TARE] function is disabled. (See Tare Mode - Page 42)
PRINT / SELECT KEY
The [PRINT/SELECT] key has two functions:
Function 1: PRINT a Weigh Ticket to a printer.
• Press the [PRINT/SELECT] key. A ticket will be sent to the
printer connected to an M2000 COM Port. (See the M2000
Printing & Ticket Formatting Guide for more information)
Function 2: SELECT a function.
• Enter the function number on the numeric keypad, followed by
the [PRINT/SELECT] key.
See M2000 Functions – Page 10.
To Next Page
Loading...
