HIGH SPEED DIGITAL WEIGHT INDICATORS
40
ZERO SCALE PARAMETERS
Track-off mud, dirt, rocks or other materials that may accumulate on the scale.
Also, utilize Zero functionality to satisfy certain Legal For Trade requirements.
POWER ON “ZERO SCALE” MESSAGE - PARAMETER 9
Description: Enables a “Zero” prompt for the Scale Operator.
PARAMETER VALUE DISPLAY EXAMPLE
0 (default)
Disabled. Weight is displayed. Normal
Operation.
1
Enabled. “2ER0” is displayed. The Operator
must Zero the scale before weighing.
PUSH TO ZERO WINDOW (OR ZERO RANGE) - PARAMETER 21
Description: The weight range, as a percentage of scale capacity, that can be
zeroed-out by pressing the [ZERO] key.
Default Value: 2 (%)
Accepted Values: 0 to 99 (%)
AUTO ZERO TRACKING (ON/OFF) - PARAMETER 22
Description: Allows the M2000 to automatically zero off any residual weight on
the scale (Up to a pre-determined limit – See Parameter 23)
PARAMETER VALUE AUTO ZERO TRACKING
0 OFF
1 (default) ON
This parameter may be a requirement for certain ‘Legal For Trade’
applications.
To Next Page
Loading...
