5
TECHNICAL MANUAL
M2000 PRE-INSTALLATION
RECEIVING INSPECTION
It is always good practice to verify that the M2000 Indicator Kit is
undamaged upon receipt.
• Check over packaging for any signs of damage.
• Remove the M2000 indicator from its protective packaging and
check for damage.
Each M2000 Indicator Kit should include:
M2000 Indicator
External 12 Volt Power Supply & Power cord (Slimline
models only)
M2000 User Manual
Capacity Label Set
Removable Connectors for all terminals in the back of the
M2000
Verify that the correct number of cable strain-reliefs are
included
BE SURE TO CHECK THAT ALL NECESSARY OPTION BOARDS
HAVE BEEN INCLUDED.
To Next Page
Loading...
