Western Scale M2000 - Power up Channel Select; Enable Total Mode

45
TECHNICAL MANUAL
POWER UP CHANNEL SELECT - PARAMETER 46
Description: Determines which scale channel will be displayed on power
up.
PARAMETER VALUE ACTION ON POWER UP
1 (default) Channel 1 as default at startup
2 Channel 2 as default at startup (if enabled)
3 Channel 3 as default at startup (if enabled)
4 Total mode (if criteria is met)
5 Scan mode
ENABLE TOTAL MODE - PARAMETER 70
Description: Sums all the scale channels into a single, total weight. Total
mode is not legal for trade in Canada.
PARAMETER VALUE TOTAL MODE
0 (default) Disabled
1 Enabled
Scale Channels must first be enabled before they are available
when using TOTAL MODE and SCAN MODE. (See M2000 User
Functions - Pa
g
e 10
)