Western Scale M2000 - Creating a Shortcut to Hyper Terminal

67
TECHNICAL MANUAL
CREATING A SHORTCUT TO HYPER TERMINAL
Creating a Hyper Terminal shortcut on your computer desktop eliminates
searching through the computers files each time you use Hyper Terminal.
• Locate the Set-Up file you downloaded from Western Scale.
Right click your mouse on the file “M2000 COM1.ht” or “M2000
COM2.ht” (see below). Click on “Send To” then “Desktop”.
• An icon will be created on your desktop. Every time you double
click the icon, Hyper Terminal will automatically start with the
correct settings for the M2000.