HIGH SPEED DIGITAL WEIGHT INDICATORS
20
ACCESSING THE M2000 TERMINALS
M2000 SLIMLINE
• Remove the Terminal Access Cover (2 small Phillips screws on back of
indicator).
M2000 DT (DESKTOP)
• Remove 4 small Phillips screws on side of indicator enclosure.
• Carefully lift top portion of stainless steel enclosure.
M2000 LSB (LIGHTWEIGHT SWIVEL BRACKET)
• Remove 8 medium Phillips screws on the back of the stainless steel
enclosure.
• Lift back plate away.
M2000 NSS (STAINLESS STEEL WASHDOWN)
• Remove 8 medium Phillips screws from the front of the stainless steel
enclosure.
• Carefully lift the front plate.
M2000 NSS (STAINLESS STEEL WASHDOWN)
• Release the 6 adjustable enclosure latches.
• Carefully lift the front plate.
DISCONNECT POWER TO THE M2000 BEFORE OPENING THE
ENCLOSURE FOR INSTALLATION OR SERVICING.
TO AVOID THE RISK OF DAMAGE TO EQUIPMENT, DO NOT
CONNECT OR DISCONNECT ANY TERMINAL CONNECTORS
WHEN POWER IS BEING SUPPLIED TO THE M2000.
To Next Page
Loading...
