Western Scale M2000 - Assigning a Ticket Event to the Barcode Scanner; Scanner Handshaking Mode

75
TECHNICAL MANUAL
ASSIGNING A TICKET EVENT TO THE SCANNER - PARAMETER 95
Description: Print a specific ticket as soon as a barcode is scanned. The
ticket is executed as soon as the M2000 receives a scanner
string. Use Parameter 95 to assign the ticket number to the
scanner.
Default Value: 0 (Disabled).
SCANNER HANDSHAKING MODE - PARAMETER 90
Description: The M2000 has 4 handshaking options.
PARAMETER VALUE
FUNCTION
0 (default) No handshaking, No beep.
1 No handshaking with a beep.
2 Hardware handshaking with no beep.
3 Hardware handshaking with a beep.
The beep option will cause the M2000 to beep every time it
receives a bar code scan. Hardware handshaking disables the
scanner if there is motion on the scale. Hardware handshaking
must be enabled on the scanner, and is scanner specific. Most
a
pp
lications will re
q
uire a Parameter Value of 0 or 1.
The M2000 will not execute the ticket if there is motion on the
scale. The indicator will display ERR 36.