HIGH SPEED DIGITAL WEIGHT INDICATORS
8
KEYPAD & KEY FUNCTIONS
ON / OFF KEY
Powers-up the M2000. The key must be pressed and held for 1
second to turn the M2000 off.
ZERO SCALE KEY
Removes small, residual weight values to return the displayed weight
to zero. The Centre Zero LED will be illuminated.
If the [ZERO SCALE] button is pressed in NET weighing mode, the
stored tare weight will appear as a negative weight on the display.
The scale cannot be zeroed if:
• The [ZERO] key has been disabled.
• The scale is in MOTION.
• The residual weight on the scale is too great (More than 2%
of Scale Capacity. See Push to Zero Window – Page 40)
Three rapid beeps will sound to indicate any of these conditions!
CLEAR KEY
Press the [CLEAR] key to erase previously entered tare values. The
[CLEAR] key will also function to cancel any keypad entry.
NUMERIC
KEYS
The [ON/OFF] key is not hard wired to the M2000 power supply. A
Power Bypass function is available for Process Control and other
applications. (See Power Switch Bypass - Page 47)
To Next Page
Loading...
