Western Scale MAX - MAX Remote Display Mode: Keypad Commands

17
O
p
eration Manua
l
Remote Keypad Functions
Remote Display Mode utilizes the keypad to send serial commands for remote
operation of indicator functions. To maximize functionality, some keys perform
multiple functions.
Press the key:
MENU – NO FUNCTION
Press & hold
the key (2 sec):
ON / OFF – NO FUNCTION
Press the key:
GR/NT - Sends a serial command to toggle between
GROSS and NET weighing modes if a tare value is
stored (M2000 only).
Press & hold
the key (2 sec):
CLEAR - Sends a serial command to clear any
previously stored tare values.
TARE:
Sends a serial command to acquire a tare value from
the weight on the scale (Container, Box, etc.).
ZERO:
Sends a serial command to set the weight display to
ZERO.
Press the key:
PRINT - Sends a serial command to the indicator to
print a scale ticket.
Press & hold
the key (2 sec):
UNITS - Sends a serial command to toggle between
Primary and Secondary Weighing Units.