Instruction for use Examination and treatment table Easy Care
** Depending on model and configuration
D2151_01 - 09/2017 33/38
Remaining device:
- Clean the remaining surfaces of the examination and treatment table Easy Care with a cloth soaked in
cleansing agent. Then wipe them dry.
- After Cleaning and disinfection let the examination and treatment table Easy Care dry for at least 1 hour.
Do not switch on the radiant warmer in order to accelerate the drying process.
- Disinfection by ultraviolet light is not recommendable as acrylic and plastic components may be
damaged.
After cleaning and disinfection reassemble all components of the examination and treatment table
Easy Care check them for completeness and correct function.
11. Waste disposal
At the end of its useful life the examination and treatment table Easy Care shall be
disposed of according to the Directive 202/96/EC as well as to the national
regulations of waste management or it shall be given to a waste management
company for professional disposal. Information on professional disposal of
domestic, hazardous and electronic waste is available from the office for environ-
ment and the regulatory authority
Pad : Domestic waste.
Illuminants: Illuminants included in the scope of the device can be returned to us for disposal free
of charge. They can also be given to one of the official waste collection.
Do not dispose illuminants in domestic waste!