Instruction for use Examination and treatment table Easy Care
** Depending on model and configuration
D2151_01 - 09/2017 24/38
7.3 Illumination
Selection of the default value
Pressing the middle key (2) opens the adjustment of the default
value for the illumination. The background of the key legend for
the illumination (11.2) is coloured green.
When turning the rotary push-button (5) the default value for the
illumination can be adjusted and resumed by pressing.
When switching on the illumination the next time this value will
be suggested as default value.
After confirmation the display will return to the main menu.
7.4 Timer
Pressing the right-hand key (3) opens the selection menu for the timer.
The background of the key legend for the timer (11.3) is coloured green.
When turning the rotary push-button (5) the various selections are
shown in a frame in the centre of the display.
The selection is resumed by psuhing the rotary push-button (5).
The following adjustments can be made:
By selecting and confirming this menu item with the rotary push-
button (5) the timer mode will change to timer mode Apgar which
corresonds to the factory setting.
The operation of the Apgar timer is described in chapter 6.8 ff.
After confirmation the display will return to the main menu.
The timer display 11.11 will show Apgar .
By selecting and conforming this menu item the timer mode will
change to stop watch .
After confirmation the display will return to the main menu.
The timer display (11.11) will show the symbol
To Next Page
Loading...
