Weyer Easy Care - Operating; Performance Data; Classifikation; Standards; Certification

Instruction for use Examination and treatment table Easy Care
** Depending on model and configuration
D2151_01 - 09/2017 37/38
13.4 Operating / Performance data
Allgemein
Operating voltage / power supply
230 V~ / 50/60 Hz
Power consumption
WY3019
WY3020
690 W / 3 A
810 W / 3.5 A
Max power input
2300 W / 10 A
Radiant warmer
Distance to the patient deck
800 mm
Heating element
Ceramic, 600 Watt
Wave length spectrum
1500 to 6800 nm
Intensity selection
2 to 20 mW/cm²
Steps of intensity selection
2 mW/cm² respectively 10%
Resolution of the displays
2 mW/cm² respectively 10%
Intensity selection display
LED-spot 2 to 30 mW/cm² respectively 10 to 100%
Actual intensity display
LED bar 2 to 30 mW/cm² respectively 10 to 100%
Residual heat display
Cooling off to 2 mW/cm² respectively 10%,
then automatic switch-off
Safety function (alarm / automatic intensity
reduction)
After 15 minutes above 10 mW/cm²
Heating-up period from 24°C ambient
temperature to max. intensity selection
Approx. 15 minutes
Illumination
2 LED stripes 5 W each
Illumination intensity
2 x 850 lm
Adjustable
5 steps
Colour temperature
4000 Kelvin
13.5 Classifikation
WY3019
WY3020
Protection class
I
I
Type applied part patient deck
B
B
Degree of protection against water
IPX0
IPX0
Classification according to MDD 93/42 EEC,
(Appendix IX, Rule 9)
II a
II a
13.6 Standards
Amongst others the device complies with:
EN 60601-1:2006 +AC:2010 + A1:2013
EN 60601-1-2:2015
EN 60601-2-21:2009 + A11:2011
13.7 Certification
Certification:
MDD 93/42 EEC, Appendix II, excluding Section 4.
EN ISO 13485:2012/AC:2012
Certified body:
TÜV- Rheinland LGA Products GmbH