100
WHILL Model C2/Ci2 User Manual
8
8.4. Inspection
It is recommended that you have the device inspected approximately once every 6 months by your distributor.
For details, consult your distributor.
8.5. Repair, maintenance, and parts replacement performed by the
manufacturer or distributor
If repair, maintenance, or parts replacement is necessary, contact your distributor or customer support.
The following maintenance can be performed by the distributors.
• Replacement of the back support
• Installation of a lap belt (Sold separately. Equipped with standard items depending on the area/countries.)
The following components can be removed from the device and repaired individually.
• Seat assembly
• Rear drive base
• Front drive base
For details, contact your distributor or customer support.
WARNING
Replace the anti-tip bar if it becomes deformed.
There is a risk that it may lose its functionality and the device may tip over.
If the device shows any abnormal signs, immediately discontinue use, and contact the
distributor or customer support.
Using the device when it is malfunctioning can potentially cause an injury or accident.
CAUTION
If a component becomes worn or requires replacement, contact your distributor.
There is a risk of damage to the device that renders it inoperable.
8.6. Disposal
When disposing of the device and its parts, be sure to follow the local disposal guidelines. If there is anything that is
unclear, consult your distributor or customer support.
8.7. About warranty information
For WHILL Model C2/Ci2 warranty information, check its warranty.
To Next Page
Loading...
