42
WHILL Model C2/Ci2 User Manual
4
4.4. Turning on the power
WARNING
Lock the brakes before turning on the power.
If the brakes are released, there is a risk that the device may start moving and tip over.
Do not press the switches on the control pad with excessive force or operate them with a sharp
object.
There is a risk that the control pad may be damaged, rendering the device inoperable.
CAUTION
Ensure the device is functional in a safe space each time after setting and adjusting the speed.
There is a risk of unintended movement of the device.
1.
Press the power button.
The device turns on and the tail lights (if equipped) turn
on.
Install a charged battery and turn on the power after
5 seconds. If the unit does not start up properly,
remove the battery and reinsert it after at least 10
seconds.
Power button
Tail lights
When the device turns on, first the WHILL logo appears
on the display, and next the current speed setting is
displayed. The display will then show the battery charge
level indicator.
To check the speed setting again, either turn the power
off and back on, or else press the speed select buttons
and adjust the speed.
WHILL logo
Speed setting Battery charge level
To Next Page
Loading...
