49
WHILL Model C2/Ci2 User Manual
4
4. Operating procedures
4.5.5. Controlling the speed
The device speed can be controlled by the degree of movement of the joystick.
Increasing the tilt angle of the joystick increases the device speed while reducing the tilt angle decreases the speed.
The speed can be controlled in a continuous scale.
High speed (large tilt angle) Low speed (small tilt angle)
• When beginning to drive, move the joystick only the amount needed to start moving slowly.
• The maximum speed when the joystick is moved all the way varies depending on the speed that was set with
the speed select buttons. For the procedure used to set the maximum speed, refer to “4.4.2. Adjusting the
speed” on page 43.
To Next Page
Loading...
