83
WHILL Model C2/Ci2 User Manual
5
5. Assembly, adjustment, and disassembly
5.4. Disassembly procedures
Disassembly of the device does not require tools. When disassembling the device, pay careful attention to the
following.
For the methods of transporting the disassembled components, refer to “6.2. Transport” on page 91.
WARNING
Perform disassembly on a flat and level surface with the battery removed and brakes locked.
There is a risk of accident.
Do not touch the connectors directly, allow them to become wet, or bring any metal or other
foreign objects close to them. Ensure that there are no foreign objects when assembling.
There is a risk of injury or electric shock as well as damage to the device or its components.
CAUTION
When disassembling the device, grab only the handle and part as described in this manual, and
do not hold the device at any other areas.
There is a risk of hand injury if it gets caught in the device.
To Next Page
Loading...
