WHILL C2 - Powering On the Device

41
WHILL Model C2/Ci2 User Manual
4
4. Operating procedures
4.3. Fastening the lap belt*
If the device you are using is equipped with a lap belt, fasten it during use.
* Sold separately. Equipped with standard items depending on the area/countries.
1.
Fasten the lap belt.
Insert the tongue into the buckle until a click sound is
heard.
After fastening the belt, adjust its length so that your
body is held securely in place.
4.3.1. Removing the lap belt
1.
Press the button on the buckle, Remove the lap
belt.