86
WHILL Model C2/Ci2 User Manual
5
2.
Grab the arm rests and lift the seat assembly straight
up to remove it from the rear drive base.
Lift the seat assembly slowly so that it does not
damage other parts.
3.
Set the removed seat assembly on the floor with the
cushion side facing up.
WARNING
If the removed seat assembly is placed
upside-down, there is a risk that the
control pad may be damaged, rendering
the device inoperable.
When placing the seat assembly on the
floor, place it with the cushion facing up
and be careful not to apply an excessive
load to the control pad.
To Next Page
Loading...
