69
WHILL Model F User Manual
5
5. Operating procedures
5.1. Inspection before getting in the device
WARNING
Inspect the following before getting in the device.
If you get in the device with some problem still present, there is a risk of injury or accident. If
components need to be replaced or repaired, stop using the device immediately and contact your
dealer or technical support.
Inspection items
1. Inspection with the power off
Assembly
• Check that all parts are correctly assembled and that there are no missing, broken, damaged, or loose
parts.
Function
• Check that the joystick moves smoothly.
• Check that the brakes can be released and the device can be pushed manually. Also, check that when the
brakes are locked, the device does not move when pushed.
• Check that the device has been properly unlocked (the lock indicator on the inside of the right arm shows
red).
Wheels
• Check the treads and ensure they are not worn down by more than 1/64 inches (0.5 mm).
• Check that there is no visible deformation or cracking of the front or rear wheels.
• Check the rear wheels to see that they are at the appropriate air pressure [specified air pressure: 40 PSI].
(Tires are not crushed when pressed in by fingers.)
Seat assembly
• Check the seat to see that it is not ripped or sagging excessively.
2. Inspection with the power on
• Check the battery charge level on the display and the charge level is sufficient.
• Check that the switches on the controller are functional.
• Check that the entire display is functional.
• Check that the horn button is functional.
• Check that the wheels are not making unusual noises when they spin.
If you encounter any of the problems listed above, which you are unable to resolve, contact your dealer or
customer support.
To Next Page
Loading...
