96
WHILL Model F User Manual
7
7.2.2. Loading the device into a trunk
This section explains precautions when loading this device into the trunk of an automobile or onto a carrier.
CAUTION
Before loading the device into the trunk of an automobile or onto a carrier, remove the battery.
There is a risk that the power may turn on and the device may move, causing an accident.
Before loading the device into the trunk of an automobile or onto a carrier, hold only parts as
described in this manual.
There is a risk of the device being damaged.
The device weighs approximately 53.0 lb (24 kg) with the battery removed. Do not unnecessarily
lift the device if you feel that it is heavy.
There is a risk of injury to the user and damage to the device as a result of falling.
When transporting the device or its components in an automobile trunk or other vehicles, make
sure that each component is safely secured.
Otherwise, there is a risk of components moving as a result of vibration or impact, and the
device becoming damaged.
1.
Remove the battery.
For the removal procedure, refer to “4.1.1. Removing
the battery” on page 59.
2.
Fold the device.
For details on how to fold the device, refer to “7.2.1.
Transporting the device with the device in a folded
state” on page 94.
3.
Load the device.
Grip the handle of the seat pipe and battery frame, and
lift up and load the device.
Take care to prevent the device from being laid down
with the controller facing down.
Battery frame
Seat pipe
To Next Page
Loading...
