WHILL F - Before Assembling the Device

24
WHILL Model F User Manual
3
3.1.1. Before assembling the device
The following device adjustments can be made to meet the user's seating needs.
• Space between arm rests
• Height of arm rest
• Position of controller
Make adjustments in the order described here.
Unfold the device.
3.2.1. Unfolding the device
Install the color plate
3.2.2. Installing the color plate
Install the arm rests.
3.2.3. About installing the arm rests
3.2.4. Installing the arm rests
Before installing, select the space between arm rests and the position of the controller.
Space between arm rests
Standard
Wide
Position of
controller
Right side
“Installation pattern 1”
on page 31
“Installation pattern 2”
on page 32
Left side
“Installation pattern 3”
on page 37
“Installation pattern 4”
on page 42
Adjust the height of the arm rests
3.2.5. Adjusting the height of the arm rest
Connect the controller cable.
3.2.6. Connecting the cable
Install the seat cushion onto the seat assembly.
3.2.7. Installing the seat cushion onto the seat
Install the battery.
3.2.8. Installing the battery