97
WHILL Model F User Manual
7
7. Storage and transport methods
7.2.3. Removing the arm rest with controller for transportation
To remove the arm rest with controller from the device for transportation, follow the procedure below.
CAUTION
When bringing the arm rest with controller onto an airplane, rst check with the aircraft
company you are using for permission to bring it on board.
Do not drop the arm rest with controller after removing it or strongly pull its cable.
There is a risk of the controller being damaged.
After removing the arm rest with controller, put it in a case or bag. Do not carry the arm rest
with controller as it is. Also, ensure that the cable is not caught.
There is a risk of the controller being damaged.
The length and main material of the arm rest with controller are as follows. Refer to this
information when checking permission to bring the arm rest on board an airplane.
• Length: 39.6 cm
• Weight: 950 g
• Main material: Aluminum
1.
Remove the battery.
For the removal procedure, refer to “4.1.1. Removing
the battery” on page 59.
2.
Remove the seat cushion from the seat.
Seat cushion
To Next Page
Loading...
