WHILL F - Page 99

98
WHILL Model F User Manual
7
3.
Disconnect the cable connector under the seat.
• When disconnecting the connector, hold and
rotate the base lock of the connector.
Do not rotate other parts of the connector.
• When disconnecting the connector, do not pull
forcefully. There is a risk of breaking the cables.
Base lock of the
connector
4.
Remove the arm rest adjustment screw.
For the removal procedure, refer to step 2 in “3.3.1.
Adjusting the height of the arm rest” on page 48.
To loosen a re-tightened screw, use a Phillips
screwdriver.
5.
Remove the arm rest with controller.
6.
Tighten the arm rest adjustment screw.
Be careful not to lose the arm rest adjustment
screw.