13 / 65
www.wireless-tek.com
The system location displays the physical location of the switch in the network, and the
user can modify the system location.
System contact display management of the current node contacts and contact information,
the user can modify the system contact.
Pic 9 Basic information page
（2）Serial port configuration page
Figure 10 shows the serial port configuration page, which shows the serial port baud rate
and other information related to the serial port.When the host through the serial terminal (such
as Windows HyperTerminal) to manage the switch, the serial port terminal COM port
configuration must be consistent with the information on this page.
To Next Page
Loading...
